How to maintain the hydraulic hammer?

Since the working environment of the hydraulic hammer is generally poor, it is easy to cause failure. In order to eliminate hidden dangers and shorten the maintenance cycle, it is necessary to carry out daily and regular maintenance.
1. Routine maintenance.
1) Keep the vibrating hammer clean, and clean the oil, dust, rust and water on the hammer body and power station after each shift.
2) Check the fasteners frequently to keep the connection firm and reliable.
3) Each lubrication point should be lubricated according to the lubrication requirements.
4) The hydraulic oil in the oil tank should be kept at a normal level, and the oil temperature should be kept at a normal level. Always check the cleanliness of the oil and place contamination.
5) Always check whether there is water in the hydraulic oil tank. If the oil is emulsified, remove the water or replace the hydraulic oil immediately.
6) Always check whether the instrument is stable and ready for normal operation, otherwise it should be repaired or replaced.
7) Check the oil circuit system for oil leakage and deal with it in time.
8) Check whether the liquid level of diesel tank, fuel tank and cooling water tank is normal. If the liquid level is too low, please replenish it in time

2. Regular maintenance.

Regularly clean the fuel tank and replace the hydraulic oil. During the break-in period, it works continuously for 500 hours, and the hydraulic oil is replaced once, the second time after three months, and the third time in September. The replacement time depends on the situation. 4) The hydraulic oil in the oil tank should be kept at a normal level, and the oil temperature should be kept at a normal level. Always check the cleanliness of the oil and place contamination.